#cloud-config
autoinstall:
  version: 1
  interactive-sections:
    - network

  # ── Locale & keyboard ──────────────────────────
  locale: en_IN.UTF-8
  keyboard:
    layout: us

  # ── Network: stop on installer network screen ─
  # Subiquity will show the network UI and use the values below as defaults.
  # This keeps installer-side IP selection, but pre-fills the expected static
  # network so console-only installs do not require retyping everything.
  network:
    network:
      version: 2
      ethernets:
        any-en:
          dhcp4: false
          match:
            name: "en*"
          addresses:
            - 172.16.10.181/23
          routes:
            - to: default
              via: 172.16.10.1
          nameservers:
            addresses:
              - 8.8.8.8
              - 1.1.1.1
        any-eth:
          dhcp4: false
          match:
            name: "eth*"
          addresses:
            - 172.16.10.181/23
          routes:
            - to: default
              via: 172.16.10.1
          nameservers:
            addresses:
              - 8.8.8.8
              - 1.1.1.1

  # ── Storage: LVM using ALL disk space ─────────
  storage:
    layout:
      name: lvm
      match:
        size: largest

  # ── Identity ──────────────────────────────────
  identity:
    hostname: cezenai
    username: cezen
    # Password: cezen@123
    password: "$6$I5VA.42G1xTeVhCv$KCLzqIKg/kbNHZyiTEMAY4FZsJMDDwoS90k6Ffb9VEwmcK.wuzlJNe3ceiEfLrzYzXEvqjYsLc7klAbeGPGab."

  # ── SSH ───────────────────────────────────────
  ssh:
    install-server: true
    allow-pw: true

  # ── Base packages ─────────────────────────────
  packages:
    - git
    - curl
    - wget
    - python3
    - avahi-daemon
    - openssh-server

  # ── Late commands ─────────────────────────────
  late-commands:
    # Extend LVM to use 100% of available disk space
    - lvextend -l +100%FREE /dev/ubuntu-vg/ubuntu-lv || true
    - resize2fs /dev/ubuntu-vg/ubuntu-lv || true

    # Allow cezen passwordless sudo (needed for install.sh)
    - echo "cezen ALL=(ALL) NOPASSWD:ALL" > /target/etc/sudoers.d/cezen
    - chmod 440 /target/etc/sudoers.d/cezen

    # Disable the installer media APT source so post-install apt uses network
    # mirrors instead of the custom ISO content.
    - sed -i 's/^deb cdrom:/# deb cdrom:/' /target/etc/apt/sources.list || true

    # Install the Cezen AI payload from the ISO first. Fall back to Git only
    # when building from older media that does not contain /cdrom/cezen-aipackage.
    - mkdir -p /target/opt/aipackage
    - cp -a /cdrom/cezen-aipackage/. /target/opt/aipackage/ || git clone https://cgit.cezentech.com/jinojose/aipackage.git /target/opt/aipackage

    # Deploy the web setup server
    - mkdir -p /target/opt/cezen
    - cp /target/opt/aipackage/autoinstall/websetup/server.py /target/opt/cezen/websetup.py
    - chmod +x /target/opt/cezen/websetup.py

    # Set hostname to cezenai so it's reachable as cezenai.local via mDNS
    - echo "cezenai" > /target/etc/hostname
    - sed -i 's/aiserver/cezenai/g' /target/etc/hosts || true

    # Create cezen-setup web UI systemd service
    - |
      cat > /target/etc/systemd/system/cezen-setup.service << 'EOF'
      [Unit]
      Description=Cezen AI Suite — Web Setup UI
      After=network-online.target avahi-daemon.service
      Wants=network-online.target
      ConditionPathExists=!/opt/cezen/.setup-done

      [Service]
      Type=simple
      ExecStart=/usr/bin/python3 /opt/cezen/websetup.py
      Restart=on-failure
      RestartSec=5

      [Install]
      WantedBy=multi-user.target
      EOF

    - curtin in-target -- systemctl enable ssh
    - curtin in-target -- systemctl enable cezen-setup.service
    - curtin in-target -- systemctl enable avahi-daemon.service

  # ── Skip confirmations ─────────────────────────
  user-data:
    disable_root: false